Studies of Technology

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2           

Prerequisite:  None

Students will be expected to explore technical area.  Technical applications will be introduced and discussed with electronic modules.  Computer applications and library research will be used to formulate written reports and oral presentations.  Students will work independently and as members of a team.  Group interaction problems will be developed.  A proposed problem and all data collected will be presented to explain results.  Academic areas such as mathematics, science, and communications will be a vital part of all activities.

Metals I

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2                           

Prerequisite: None

The students enrolled in Metals I will get instruction and work in the following metals areas: sheet metal, arc and gas welding, foundry and forging, and hand tool processes. Students will learn the chemistry and history of metals.  Machines and equipment available for Metals I include eight arc welders, eight oxyacetylene welders, tool grinders, metal benders, gas forge, foundry kiln, heat treating unit, and power hacksaw. Students are at liberty to make projects of own design and choice, after the minimum number of required exercises are completed.  There will be a charge for materials that the students will use beyond required activities.

Introduction to Electronics

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2           

Prerequisite: Algebra I

Students enrolled in Intro. To Electronics will develop the basic skills necessary to understand electricity as it applies to industrial and technical careers, including electrical installation, electronics repair, automotive technology, and computer repair.  Emphasis will be placed on the theory and principles of electricity as it applied to current and future technical systems, as well as how electricity impacts each student as a consumer.

Included in this study of electricity will be Ohm’s Law, units of measure for electricity, basic circuit principles and design, component identification and application, and system analysis of current technologies that use electrical/electronic components.  Students will perform basic mathematical operations on electrical quantities and will manipulate electrical formulas regularly throughout the semester.  Students will be required to complete a research project near the end of the semester.  Some applications will be emphasized through the use of limited lab activities and group projects. 

Students will be expected to maintain a professional, positive attitude throughout this course.

Computer Hardware

One Semester                      Grades: 10, 11, 12

Credit: 1/2             

Prerequisite: Introduction to Electronics

Computer Hardware will introduce the student to the hardware architecture of the modern personal computer.  Computer hardware upgrades, diagnosis and repair will be emphasized throughout the course.  Students will apply knowledge of electronic components to the modular construction of today’s computer and will explore the history and development of current computer technologies.  Students will install and effectively use DOS and will update the computer to the Windows platform.  Networking and communication will be introduced, including both hardware support and operating system installation.  Students will be required to work independently and in teams throughout the semester.

Computer Networking

One Semester                      Grades:11, 12

Credit: 1/2           

Prerequisite: C or higher in Computer Hardware

Students in Computer Networking will continue to explore the technologies supporting modern computer systems, with emphasis on networking and communication.  Integration of Windows 3.11 and Windows 95 as network operating systems will be used to install and maintain a local area network in the Electronics Lab.  Network printer functions, shared resources, communication functions and peer-to-peer messaging will be applied as the students maintain and expand the network.  Students will be required to work independently and in teams throughout the semester. 

Advanced Metals 

One Semester                      Grades: 11, 12

Credit: 1/2                            Prerequisite: Metals I

The students enrolled in Advanced Metals will get technical training in machine tools and processes.  They will learn how to use the metal lathes, milling machine, metal shaper as well as getting an introduction into CNC.  Students will also continue to work in areas such as welding, specifically in using the mig wire welding as well as arc and oxy acetylene.  Students are required to purchase a pair of safety glasses for the course.  Students must have successfully completed Metals I in order to enroll.

Tech. Drafting I

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2                            Prerequisite: None

This is a course of mechanical drawing designed to give a basic understanding of all areas of drafting and to develop basic drafting skill.  CAD (computer aided drafting and design) will be introduced and used.

Mechanical Drafting I

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2            Prerequisite: Tech. Drafting I

This is a course of advanced mechanical drawing designed to continue development of drafting skills and procedures used on more complex drawings.  Drawings will be produced by use of the CAD (Computer aided drafting) system.

Architectural Drafting I

One semester                       Grades: 9, 10, 11, 12

Credit: 1/2            Prerequisite: Tech. Drafting I or Graphic/Industrial Design

This course is designed for students to learn fundamental skills and concepts necessary for architectural planning, designing, and drawing.  Students will learn to prepare architectural drawings that will effectively and accurately communicate ideas and designs.  CAD (computer aided drafting) procedures will be used for drawings, and presentations.

Mechanical Drafting II

One Semester                      Grades: 11, 12

Credit: 1/2           

Prerequisite: Mechanical Drafting I

This is a course study to learn the design of machine parts and the drawings used for manufacturing.  Formulas and writing of specifications will be taught.  The relationship of CAD/CAM procedures will be discussed.  CAD procedures will be used for drawings, presentations, and design applications.  3-D CAD will be introduced and used for some applications.

Architectural Drafting II

One Semester                      Grades: 11,12

Credit: 1/2           

Prerequisite:  Architectural Drafting I

This course is designed for students to earn fundamental skills and concepts necessary for architectural planning, designing, and drawing.  Students will learn to prepare architectural drawings that will effectively and accurately communicate ideas and designs to clients, contractors, and construction personnel.  Advance CAD procedures will be used for drawing, presentations, and design applications.

Welding

One Semester                      Grades: 10, 11,12

Credit: 1/2           

Prerequisite:  “C” or higher in Metals I

Welding will allow students that are successful in Metals to further explore the processes in the Welding Industry.  This course will focus on developing the skills necessary to succeed in an entry level welding position or to succeed in post-secondary welding training.  Oxy-acetylene welding, arc welding, MIG processes and an introduction to TIG processes will be performed regularly as the student perfects welding skills that were began in Metals I. Safety will be emphasized in all lab situation, as well as professional behavior, workplace readiness skills and problem solving activities.

WebPages

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2           

Prerequisite: Keyboarding

Students enrolled in this class will learn the programming languages HTML and touch on Javascript and CSS.  Students will utilize this knowledge, along with conceptual design models, in creating various World Wide Web pages for community and school use.  This course will rely heavily on self-directed reading, research, and writing assignment.  Students will be required to sign and follow the USD 475 Acceptable Use Policy. 

Advanced WebPages

One Semester                      Grades: 10, 11, 12

Credit: 1/2 
Prerequisite: Keyboarding, WebPages (C or Above)

Students enrolled in this class will learn advanced HTML, CSS, and Java Script.  This course will also explore advanced web development software. 
Students will be responsible for updating and maintaining the high school web site.

Architecture Construction Processes

One Semester                      Grades: 10, 11, 12

Credit: 1/2           

Prerequisite: Drafting I or Graphic/Industrial Design

This is a course designed for a person with an interest in construction.  Topics discussed will include careers in construction, design, building codes, reading prints, building materials, safety, hand tool uses, machine tool processes, and types of construction.  Various construction materials will be discussed; comparing cost and cost estimation will be a part of the class discussions.

Graphic/Industrial Design

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2                            Prerequisite: None

A part of computer aided drafting, this is a class made to explore the area of graphic communications.  The purpose is to communicate through the use of drawings and documents.  Although mechanical and architectural topics will be used the activities will be adaptable to other areas.  Problem solving using scale, color, shapes, patterns, text, images, textures, and sound may be used.

Automotive Technology I

One Semester      Grades: 10, 11, 12

Credit: 1/2           

Prerequisite: Sophomore standing, Applied Math or Algebra I (or concurrent enrollment)

Automotive Technology I is designed to meet student needs at three levels.  First, it is an entry-level course for students entering the automotive program of study.  It is prerequisite for the advanced automotive courses.  Second, it is designed to enable students to maintain their own vehicles and perform minor adjustments and repairs.  Third, Automotive Technology I will make all students better consumers for purchasing, driving, and maintaining automobiles.  The systems covered in Automotive Technology I are cooling, lubrication, electrical, fuel, brakes, tires, and suspension with shop safety emphasized in all situation.  Class time will be approximately 60 percent class work and 40 percent shop work.  A basic understanding of mathematics, chemistry, and physics is a must for success.

Advanced Studies Of Technology

One Semester                      Grades: 10, 11, 12

Credit 1/2            

Prerequisite: Must have successfully taken classes in the technical area

Designed for the advanced motivated student with a desire to research a technical problem

Women In Technology

One Semester                      Grades: 9, 10, 11, 12

Credit: 1/2                            Prerequisite: None

This course will be the first step in meeting the needs of women and providing equal opportunities for women.  The intent is to encourage more women to take technical courses and to reinforce the importance of technical education.  This class will offer more than exploratory content.  The skills and processes in each of the content areas will be emphasized as work place readiness development.  Content area will be automotive technology, drafting technology, and construction/manufacturing technology.

Automotive Technology II

One Semester                      Grades: 11, 12

Credit 1                

Prerequisite: "C" or higher in (2 period block) Auto Tech I

Automotive Technology II is designed for students preparing for careers in automotive or related mechanical fields.  Electricity and electronics will be stressed throughout the course as a foundation for diagnosis and trouble shooting.  Limited major repairs, drivetrains, suspension and steering systems, and emission control systems will be covered, with emphasis placed on testing and repair.  Students will use technical manuals and computer supported data to complete repair orders on a regular basis.  Class time will be approximately 30 percent class work and 70 percent shop work.

Technical Work Experience

One Year                               Grades:  11, 12

Credit: Variable                 

Prerequisite:  Advanced Class in Tech. Education

This is an educational opportunity designed for the advanced student that has a vocational interest he/she wishes to pursue.  The student would have the opportunity to work in the area of interest with a professional at a business.  Class would also be held part time to discuss job related skills needed to succeed.  This work experience credit will only be awarded upon successful completion of the full year.

Advanced Automotive Engines

One Semester                      Grades: 12

Credit: 1               

Prerequisite: "C" or higher in Auto (2 period block) Tech II  Electronics I

Advanced Automotive Engines is the final course in the automotive program.  Application of previously-learned skills and knowledge will be necessary for successful completion of this course.  Theory, operation, diagnosis and repair of computerized engine controls will be explored in detail, to include domestic systems, as well as an overview of the import systems.  Variations in engine design and engineering will be discussed and demonstrated emphasizing trends for future developments.  All students will use precision measuring and assembly instruments to disassemble, inspect, measure, diagnose, recondition, and reassemble an automotive engine.  Professional habits and attitudes will be expected throughout the course to enhance the development of skill necessary to enter the automotive or related field.